Switching to Standard-Definition Channels
 
   1. On your TV’s remote, press the VIDEO INPUT MODE button (refer to your TV’s manual for clarification) as necessary until you reach the Standard TV Video Input from the INPUT SOURCE LIST on the first page.
   2. On the Charter Communications remote, press the CABLE button to set the remote in Cable mode.
   3. Use the Charter Communications remote to access the standard definition channels in any of the following ways:
          * Press the CHANNEL UP/DOWN buttons to scroll to a standard definition channel.
          * Press the applicable number keys to go to a specific channel number.
          * Browse, using the Interactive Program Guide (IPG).
   4. With your TV’s remote, press the FORMAT (aspect ratio) button (if available) as needed, stretching or zooming to adjust the picture display until any black (or gray) sidebars are eliminated.

Changing Charter Standard-Definition Channels

There is no need to switch the input source when changing from one standard-definition channel to another standard channel.

   1. On the Charter Communications remote, press the CABLE button to set the remote in Cable mode.
   2. Follow step 3 above.